How far goes the tube inside the clamp ?

How far goes the tube inside the clamp ?

This depends on the clamp size and model. On average, the tube goes into the clamp by 20 to 30 millimeters anyway. We always recommend the following :
- Do not push the tube entirely inside the clamp. 
- Look for the 2 markers inside the clamp (at the edge and deeper inside the clamp).
- The tube has to lay over those 2 markers inside in order to be level.
- Do not go further then the deepest marker.

Size A27 (3/4') :
  1. The tube goes on an average of 2.5cm inside most of the clamps.

Size B34 (1') :
  1. The tube goes on an average of 2.5cm inside most of the clamps.

Size C42 (1 1/4') :
  1. The tube goes on an average of 3.5cm inside most of the clamps.

Size D48 (1 1/2') :
  1. The tube goes on an average of 3.5cm inside most of the clamps.

Size E60 (2') :



Tubeclampstore.com
Online sale of tubular fittings.

    • Related Articles

    • What clamps size should i use ?

      Thanks to choose our tubular fittings, easily create temporary or permanent constructions ultra solid. Each piece can support an axial load between 500kg and 700kg with locking screw * (depending on the connection mark chosen), for a tight screw with ...

    • Would the B34 clamps fit on a 35mm tube ?

      Yes most of the B34 clamps can fit on a 35mm tube, but it won't be hold optimal. 32-35mm is the limit for a perfect hold. Sometime the inperfection of the clamp material can block the entry for a 35mm tube. We always recommend the 33.7mm for this ...

    • Would the A27 clamps fit on a 26mm tube ?

      Yes the clamp A27 can fit on the 26mm tube, but it won't be hold optimal. 26-28mm is the limit for a perfect hold. Size A27 (26.9mm) : This fitting is recommended to fit outer ø tube : 26.9mm (3/4"). This fitting can fit within outer ø tube : ...

    • What size thread has the screws ?

      Our clamps have stainless steel screws for increased corrosion resistance. Here is the detail of each screw based on the clamp size.  For clamps size A27 (3/4') and B34 (1') : Engels G 1/4” BSP For clamps size C42 (1 1/4'), D48 (1 1/2') and E60 (2') ...

    • Can i insert a 26.9 in a 33.7mm tube ?

      Unfortunately no, most of our tubes are too thick to be inserted into each other. The only solution is to buy on a different shop tubes of less quality, that are thinner and will be able to insert.  Ø tube 26.9mm (2.6mm) 33.7mm (3.2mm) 42.4mm (3.2mm) ...