Would the B34 clamps fit on a 35mm tube ?

• Related Articles

• Would the A27 clamps fit on a 26mm tube ?

  Yes the clamp A27 can fit on the 26mm tube, but it won't be hold optimal. 26-28mm is the limit for a perfect hold. Size A27 (26.9mm) : This fitting is recommended to fit outer ø tube : 26.9mm (3/4"). This fitting can fit within outer ø tube : ...

• Would the C42 clamps fit on a 40mm tube ?

  Yes the clamp C42 can fit on the 40mm tube, but it won't be hold optimal. 41-43mm is the limit for a perfect hold. Size C42 (42.4mm) : This fitting is recommended to fit outer ø tube : 42.4mm (1.1/4"). This fitting can fit within outer ø tube : ...

• Can i refit a clamp on a powder coated tube ?

  Yes you can refit it, but the powder coating get's damaged under the clamp when it's fitted. So when you refit it, you will see the mark on the tube. Always test fit the clamps before fixing them. Tubeclampstore.com Online sale of tubular fittings.

• How far goes the tube inside the clamp ?

  This depends on the clamp size and model. On average, the tube goes into the clamp by 20 to 30 millimeters anyway. We always recommend the following : - Do not push the tube entirely inside the clamp.  - Look for the 2 markers inside the clamp (at ...

• What clamps size should i use ?

  Thanks to choose our tubular fittings, easily create temporary or permanent constructions ultra solid. Each piece can support an axial load between 500kg and 700kg with locking screw * (depending on the connection mark chosen), for a tight screw with ...