What size thread has the screws ?

• Related Articles

• What clamps size should i use ?

  Thanks to choose our tubular fittings, easily create temporary or permanent constructions ultra solid. Each piece can support an axial load between 500kg and 700kg with locking screw * (depending on the connection mark chosen), for a tight screw with ...

• What size allen key do I need ?

  The size of the allen key depends on the clamps, there are divided in two. For clamps size A27 (3/4') and B34 (1') : The allen key needs to be size 1/4' , but in most shops you will find 6mm as standard. This is not ideal for fastening the clamps ...

• How far goes the tube inside the clamp ?

  This depends on the clamp size and model. On average, the tube goes into the clamp by 20 to 30 millimeters anyway. We always recommend the following : - Do not push the tube entirely inside the clamp.  - Look for the 2 markers inside the clamp (at ...

• Would the C42 clamps fit on a 40mm tube ?

  Yes the clamp C42 can fit on the 40mm tube, but it won't be hold optimal. 41-43mm is the limit for a perfect hold. Size C42 (42.4mm) : This fitting is recommended to fit outer ø tube : 42.4mm (1.1/4"). This fitting can fit within outer ø tube : ...

• Fittings of the brand INTERCLAMP

  Thanks to our INTERCLAMP tubular fittings, easily create temporary or permanent constructions ultra solid. Each piece can support an axial load of 500kg with locking screw*, for a tight screw with a torque of 40Nm (obtained with a ratchet). Fittings ...